Vorschau: Magewell USB Capture SDI Gen 2

289,00 € *

zzgl.19% MwSt.zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-2 Tage

Alle Preise sind Listenpreise zzgl. 19% MwSt. Um Preise für Firmen oder Händler zu sehen, können Sie sich hier anmelden bzw. hier registrieren.

Artikel-Nr.: 303511

USB Capture SDI Gen 2 One channel HD capture dongle Captures SD/HD/3G/2K SDI + embedded... mehr

Menü schließen

Produktinformationen "Magewell USB Capture SDI Gen 2"

USB Capture SDI Gen 2

One channel HD capture dongle
Captures SD/HD/3G/2K SDI + embedded audio
Support for capture resolutions up to 2048×1080

Driverless Supported OS:

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (Ubuntu 12.04–16.10, CentOS 7)
OS X 10.9–10.11
macOS 10.12
Chrome OS

XI100DUSB-SDI

Supported OS	Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (Ubuntu 12.04–16.10, CentOS 7) OS X 10.9–10.11 macOS 10.12 Chrome OS
Supported APIs	Windows DirectShow Wave API/DirectSound/WASAPI Linux V4L2 ALSA OS X/macOS QuickTime AV Foundation
Supported Software	VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software
Input Interfaces	MCX SD/HD/3G SDI
Host Interfaces	USB 3.0 compatible with USB 2.0 compatible with USB 3.1 Gen 1
Input Features	Support for up to 2048×1080 input resulution
SDI Specific Features	Integrated cable equalizer supporting cable lengths up to 140M for 3G-SDI signals Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards Support for 2K (2048×1080) mode Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support for 10/12-bit color depth Support for extraction of SMPTE 352 payload identifier Support for up to 2 (mono) audio channels at 48KHz Support for extraction of audio formation information & channel status data Limited support of 3Gb-DS: only the first stream can be captured Limited support for capture of the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-bit: captured as 4:2:2 RGB 4:4:4: R/B sub-sampled
Video Capture format	Support for capture resolutions up to 2048×1080 Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.) 1920×1080 YUY2 (up to 70fps) 1920×1080 RGB24 (up to 60fps) Support for YUY2 & UYVY 4:2:2 8-bit Support for RGB24 & RGB32 4:4:4 8-bit The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features	Video processing pipelines with 160 Mpixels/s processing bandwidth Video cropping Video scaling Video de-interlacing Weave Blend top & bottom field Top field only Bottom field only Video aspect ratio conversion Auto or manual selection of input aspect ratio Auto or manual selection of capture aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) Video color format conversion Auto or manual selection of input color format & quantization range Auto or manual selection of capture color format, quantization range & saturation range Support for RGB, YCbCr 601, YCbCr 709 color formats Support for Limited or Full quantization range Support for Limited, Full & ‘Extended gamut’ saturation range Video frame rate conversion Vertical flip and mirror
Multiple devices on one computer	Support for connecting multiple USB devices to one system Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK	The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade	Multiple devices in one system can be upgraded simultaneously
LED Indicator	Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor	92.2mm (L) x 40.2mm (W) x 12.3mm (H)
Accessories	USB 3.0 cable MCX to SDI cable
Power Consumption	5V max current: ~0.5 A max power consumption： ~2.5 W
Working Environment	Operating temperature: 0 to 50 deg C Storage temperature: –20 to 70 deg C Relative Humidity: 5% to 90% non-condensing