Firmware und Treiber für die Magewell Eco Capture-Familie wurden aktualisiert.

Bitte überprüfen Sie die Versionshinweise unten.

Firmware: V1.32 (http://www.magewell.com/files/procapturehardware1.32.zip)

a. Add support to Closed Caption and ANC data in SDI signal. 

b. Fix the problem of HDMI output signal (4K@60fps, 4:4:4) of Pro Capture HDMI 4K Plus (Hardware Version A).

c. High performance firmware is applicable to Pro Capture AIO 4K Plus (Hardware Version C/D), Pro Capture AIO 4K (Hardware Version A), Pro Capture AIO (Hardware Version C), Pro Capture Dual SDI (Hardware Version B/C), Pro Capture HDMI 4K Plus (Hardware Version A), Pro Capture Mini SDI (Hardware Version B), Pro Capture Quad SDI (Hardware Version C), Pro Capture SDI 4K Plus (Hardware Version C/D), Pro Capture SDI (Hardware Version B).

d. Low power consumption firmware is applicable to Pro Capture Dual SDI (Hardware Version B/C), Pro Capture Mini SDI (Hardware Version B).

Windows

Driver: V1.3.0.3771 (http://www.magewell.com/files/drivers/ProCapture_3771.zip)

a. Fix the problem of incontinuous hardware timestamp for audio.

b. Add support to HDMI audio without audio status.

c. Add support to Pro Capture HDMI 4K Plus LT (Hardware Version A).

d. Add support to ANC data in SDI signal. (Firmware Version 1.32 and later)

e. Pro Capture HDMI 4K Plus & AIO 4K Plus: add support to HDMI HDR info-frame.

Linux (x86, ARM TX1&TX2)

Driver: V1.2.0.3773 (http://www.magewell.com/files/drivers/ProCaptureForLinux_3773.tar.gz)

a. Add support to Pro Capture SDI 4K Plus.

b. Add support to Pro Capture HDMI 4K Plus (Hardware Version A).

c. Add support to kernel version 4.13.x and above. 

d. Add support to SDI closed caption and ANC. 

These versions above are available for download at download page.