Lieferung nur an Gewerbetreibende Gemäß §14 BGB, kein Verkauf an private Endverbraucher

Incident light white MBJ-Imaging JBTL-0328

€199.00 *

Prices plus 19% VAT plus shipping costs

Estimated delivery time 2 - 5 Days

All prices are list prices excl. 19% VAT. In order to see prices for companies or dealers, you need to login or register here.
  • 303533
Incident light white MBJ-Imaging JBTL-0328 Illuminated area: 30x285 mm with direct emission... more
Product information "Incident light white MBJ-Imaging JBTL-0328"

Incident light white MBJ-Imaging JBTL-0328

Illuminated area: 30x285 mm with direct emission

JustBright-Serie 

The JustBright illumination series is designed to lowest costs. The aluminium board is ground and cooling plate in one. The housing is made by 3D printing which allows great freedoms for custom-made designs.

The new innovative LED controller allows flash and steady mode operation. For flash mode the light is automatically driven with up to 400% of the standard power. Using the 0-10 V interface the illumination is dimmable during steady light. The I/O are short current protected. To prevent overheating a thermo switch is build-in.

Operating mode

The integrated LED controller allows a flash and steady light mode:

  • The triggr signal switches the light on and off at any time. After a trigger ‘low-high edge’ the LED are 4-times overdriven for 20ms.
  • After that period the light enters in the steady light mode. The controller runs in the PWM mode. Therefor for this mode camera exposure times > 10ms are recommended. A analogue 0V to 10V input can be used for dimming.  
Model JBTL-0328  Incident light’s diffuse light from above 
Luminous area (axb) 30 x 285 mm
LED-color

White (WT) with peak wave length near 460nm and 560nm 

Recommended object distance 

10mm to 50mm, depending on reproduction scale, the size of the object and the type of illumination. 

Operating voltage (Uin) 24V DC +/- 10% 
Operating mode 

3x overdrive flash light and continuous light 

Dimmer (steady light) 1V(10%) to 10V (100%) 
Max. power 

8.7W (continuous mode) 26W@20ms (flash light) 

Trigger Latency  <20μs 

Recommended min. camera exposure 

> 50μs (flash mode) > 5ms (steady mode) 

Dimensions 

300mm x 64mm x 29mm

Weight  300g 
Connector  M8x1 socket, 4pin, male
Operation temperature 10°C to 30°C 
Degree of protection   IP54 
Protection class  DIN EN 60825-1 class 1
Humidity  30% to 70%

 

 

LED-Color: white
light guide: directional light
Operation Mode: continuous light, flash light
Protection class: IP54
Related links to "Incident light white MBJ-Imaging JBTL-0328"
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "Incident light white MBJ-Imaging JBTL-0328"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Datasheet​
Viewed